This document discusses the analysis of harmonics generated in a power system due to transformer loads using artificial neural networks. Transformers operate in a non-linear region which causes them to generate harmonics. These harmonics can impact transformer losses and power quality. Artificial neural networks provide a novel technique for analyzing these harmonics by learning the input-output relationships from training data. The key advantages of neural networks for this application are their ability to model complex non-linear systems and learn from examples without requiring an explicit mathematical model.
Highlights:
* Looks at the influence of electricity and transmitters on our health.
* Explains electromagnetic fields.
* Discusses the phenomenon of ‘electrosmog’ in particular.
* Attempts to provide candid and unbiased answers and sketch the current state of knowledge.
* Discusses legislation and possible preventive measures.
WIRELESS POWER TRANSFER - A TECHNOLOGY THAT HAS COME OF AGEIAEME Publication
Wireless power transfer has its roots in Tesla’s experiments and his proposition that electric power can be transferred not only by means of radiation, but also by means of induction and resonant coupling. Recent trends in the development of this technology are addressed. Also the basic mathematical ideas that help us understand the various parameters and issues for optimization of power transfer are given. The power in a given load in case of two coils is compared with that obtained in a modified set up consisting of three coils and it is shown that by proper choice of coupling coefficients, one might improvise the existing methods.
Research Inventy : International Journal of Engineering and Science is published by the group of young academic and industrial researchers with 12 Issues per year. It is an online as well as print version open access journal that provides rapid publication (monthly) of articles in all areas of the subject such as: civil, mechanical, chemical, electronic and computer engineering as well as production and information technology. The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published by rapid process within 20 days after acceptance and peer review process takes only 7 days. All articles published in Research Inventy will be peer-reviewed.
Ultrasonic transducers are a key element that governs the performances of both generating and receiving ultrasound in an ultrasonic measurement system. Electrical impedance is a parameter sensitive to the environment of the transducer; it contains information about the transducer but also on the medium in which it is immersed. Several practical applications exploit this property. For this study, the model is implemented with the VHDL-AMS behavioral language. The simulations approaches presented in this work are based on the electrical Redwood model and its parameters are deduced from the transducer electroacoustic characteristics.
Highlights:
* Looks at the influence of electricity and transmitters on our health.
* Explains electromagnetic fields.
* Discusses the phenomenon of ‘electrosmog’ in particular.
* Attempts to provide candid and unbiased answers and sketch the current state of knowledge.
* Discusses legislation and possible preventive measures.
WIRELESS POWER TRANSFER - A TECHNOLOGY THAT HAS COME OF AGEIAEME Publication
Wireless power transfer has its roots in Tesla’s experiments and his proposition that electric power can be transferred not only by means of radiation, but also by means of induction and resonant coupling. Recent trends in the development of this technology are addressed. Also the basic mathematical ideas that help us understand the various parameters and issues for optimization of power transfer are given. The power in a given load in case of two coils is compared with that obtained in a modified set up consisting of three coils and it is shown that by proper choice of coupling coefficients, one might improvise the existing methods.
Research Inventy : International Journal of Engineering and Science is published by the group of young academic and industrial researchers with 12 Issues per year. It is an online as well as print version open access journal that provides rapid publication (monthly) of articles in all areas of the subject such as: civil, mechanical, chemical, electronic and computer engineering as well as production and information technology. The Journal welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published by rapid process within 20 days after acceptance and peer review process takes only 7 days. All articles published in Research Inventy will be peer-reviewed.
Ultrasonic transducers are a key element that governs the performances of both generating and receiving ultrasound in an ultrasonic measurement system. Electrical impedance is a parameter sensitive to the environment of the transducer; it contains information about the transducer but also on the medium in which it is immersed. Several practical applications exploit this property. For this study, the model is implemented with the VHDL-AMS behavioral language. The simulations approaches presented in this work are based on the electrical Redwood model and its parameters are deduced from the transducer electroacoustic characteristics.
Right Selection of Inverter Systems and Harmonics Reduction A Means of Enhanc...ijtsrd
The paper examines various types of inverter systems available in the markets in terms of their waveforms, harmonics and quality by taking the ideal Sinusoidal waveform as a reference. It illuminates some vital information on various types of inverters and their technologies. It identifies harmonics distortion has an important criterion for selecting a power inverter. It shows in lucid manner how to mathematically determine Total Harmonic Distortion THD of a waveform. It calculates the harmonics content of a Square wave inverter and proffer solution on how to reduce them. The resultant is an empowerment of power electronics engineers to distinguish which of the types to purchase in order to optimally improve national infrastructure and to enhance values of their scarce resources. Akinwole O. O | Adewale A. S | Femi-Jemilohun, O. J ""Right Selection of Inverter Systems and Harmonics Reduction: A Means of Enhancing Power Infrastructure in Nigeria"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23550.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23550/right-selection-of-inverter-systems-and-harmonics-reduction-a-means-of-enhancing-power-infrastructure-in-nigeria/akinwole-o-o
Magneto Optic Current Transformer Technology (MOCT)IOSRJEEE
An accurate electric current transducer is a key component of any power system instrumentation. To measure currents power stations and substations conventionally employ inductive type current transformers .For high voltage applications, porcelain insulators and oil-impregnated materials have to be used to produce insulation between the primary bus and the secondary windings. The insulation structure has to be designed carefully to avoid electric field stresses, which could eventually cause insulation breakdown. The electric current path of the primary bus has to be designed properly to minimize the mechanical forces on the primary conductors for through faults. The reliability of conventional high-voltage current transformers have been questioned because of their violent destructive failures which caused fires and impact damage to adjacent apparatus in the switchyards, electric damage to relays, and power service disruptions. In addition to the concerns, with the computer control techniques and digital protection devices being introduced into power systems, the conventional current transformers have caused further difficulties, as they introduce electromagnetic interference through the ground loop into the digital systems. Magneto-optical current transformer(MOCT)technology provides a solution for many of the above mentioned problems. The MOCT measures the electric current by means of Faraday Effect that is the orientation of polarized light rotates under the influence of the magnetic fields and the rotation angle is proportional to the strength of the magnetic field component in the direction of optical path. MOCT is a passive optical current transducer which uses light to accurately measure current on high voltage systems and determines the rotation angle & converts it into a signal of few volts proportional to the current
The developing technology, the future, a tech that can replace the electronics era itself.
Few information about the tech and the fundamentals of Spintronics.
This paper presents a highly efficient power transfer system based on a co-design of a class-E power amplifier (PA) and a pair of inductively coupled Helical coils for through-metal-wall power transfer. Power is transferred wirelessly through a 3.1-mm thick aluminum barrier without any physical penetration and contact. Measurement results show that the class-E PA achieves a peak power gain of 25.2 dB and a maximum collector efficiency of 57.3%, all at 200 Hz. The proposed system obtains a maximum power transfer efficiency of 9% and it can deliver 5 W power to the receiver side through the aluminum barrier.
ANALYSIS AND SIMULATION OF HARMONICS FOR VARIOUS RESIDENTIAL LOADS USING SIMU...ijiert bestjournal
Harmonics are the by - products of modern electronic devices i.e. nonlinear loads,this harmonics by drawing current in abrupt short pulses,rather than in a smooth sinusoidal manner. Any distribution circuit feeding nonlinear loads will contain some degree of harmonic frequencies in multiples . Due to the rapidly increasing number of non - linear loads in distribution systems,the harmonic distortion of the current and voltage increases. Examples of non - linear loads are personal computer,television set (TV),f luorescent tube with electronic ballast,compact fluorescent lamp,battery charger,uninterrupted power supply (UPS) and any other equipment powered by switched - mode power supply (SMPS) unit. As the number of harmonics - producing loads in residences has inc reased over the years,it has become increasingly necessary to address their effects on the distribution system. Power Quality of distribution networks is severely affected due to the flow of these generated harmonics. Harmonic currents generated by nonli n ear loads can cause problems on the power system. These harmonics can cause excessive heat in many appliances,and hence reduce the life span of the distribution transformer supplying such loads,protecting equipments in power system. It can also increase power consumption and reduce system efficiency. It also lowers the system power factor. In this paper presents the results of a SIMULINK of harmonic distortion caused by different non linear home appliances a nd analysis of percentage total harmonic distort ion which is found between ranges of 50 to greater than 200.
Model of Pulsed Electrical Discharge Machining (EDM) using RL CircuitIJPEDS-IAES
This article presents a model of pulsed Electrical Discharge Machining (EDM) using RL circuit. There are several mathematical models have been successfully developed based on the initial, ignition and discharge phase of current and voltage gap. According to these models, the circuit schematic of transistor pulse power generator has been designed using electrical model in Matlab Simulink software to identify the profile of voltage and current during machining process. Then, the simulation results are compared with the experimental results.
Fundamentals of electromagnetic compatibility (EMC)Bruno De Wachter
Electromagnetic interference, EMI, has become very important in the last few decades as the amount of electronic equipment in use has increased enormously. This has led to an increase in the sources of interference, e.g. digital equipment and switching power supplies, and an increase in the sensitivity of equipment to interference, due to higher data rates.
This development demands high quality electrical installations in all buildings where electromagnetic non-compatibility leads to either higher costs or to an unacceptable decrease in safety standards.
This application note gives an overview and a basic understanding of the major physical principles of electromagnetic interference and an introduction to the principles of mitigation of disturbing effects. As a result, the measures required to achieve an EMC-compliant installation should be easily understood.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Right Selection of Inverter Systems and Harmonics Reduction A Means of Enhanc...ijtsrd
The paper examines various types of inverter systems available in the markets in terms of their waveforms, harmonics and quality by taking the ideal Sinusoidal waveform as a reference. It illuminates some vital information on various types of inverters and their technologies. It identifies harmonics distortion has an important criterion for selecting a power inverter. It shows in lucid manner how to mathematically determine Total Harmonic Distortion THD of a waveform. It calculates the harmonics content of a Square wave inverter and proffer solution on how to reduce them. The resultant is an empowerment of power electronics engineers to distinguish which of the types to purchase in order to optimally improve national infrastructure and to enhance values of their scarce resources. Akinwole O. O | Adewale A. S | Femi-Jemilohun, O. J ""Right Selection of Inverter Systems and Harmonics Reduction: A Means of Enhancing Power Infrastructure in Nigeria"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23550.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23550/right-selection-of-inverter-systems-and-harmonics-reduction-a-means-of-enhancing-power-infrastructure-in-nigeria/akinwole-o-o
Magneto Optic Current Transformer Technology (MOCT)IOSRJEEE
An accurate electric current transducer is a key component of any power system instrumentation. To measure currents power stations and substations conventionally employ inductive type current transformers .For high voltage applications, porcelain insulators and oil-impregnated materials have to be used to produce insulation between the primary bus and the secondary windings. The insulation structure has to be designed carefully to avoid electric field stresses, which could eventually cause insulation breakdown. The electric current path of the primary bus has to be designed properly to minimize the mechanical forces on the primary conductors for through faults. The reliability of conventional high-voltage current transformers have been questioned because of their violent destructive failures which caused fires and impact damage to adjacent apparatus in the switchyards, electric damage to relays, and power service disruptions. In addition to the concerns, with the computer control techniques and digital protection devices being introduced into power systems, the conventional current transformers have caused further difficulties, as they introduce electromagnetic interference through the ground loop into the digital systems. Magneto-optical current transformer(MOCT)technology provides a solution for many of the above mentioned problems. The MOCT measures the electric current by means of Faraday Effect that is the orientation of polarized light rotates under the influence of the magnetic fields and the rotation angle is proportional to the strength of the magnetic field component in the direction of optical path. MOCT is a passive optical current transducer which uses light to accurately measure current on high voltage systems and determines the rotation angle & converts it into a signal of few volts proportional to the current
The developing technology, the future, a tech that can replace the electronics era itself.
Few information about the tech and the fundamentals of Spintronics.
This paper presents a highly efficient power transfer system based on a co-design of a class-E power amplifier (PA) and a pair of inductively coupled Helical coils for through-metal-wall power transfer. Power is transferred wirelessly through a 3.1-mm thick aluminum barrier without any physical penetration and contact. Measurement results show that the class-E PA achieves a peak power gain of 25.2 dB and a maximum collector efficiency of 57.3%, all at 200 Hz. The proposed system obtains a maximum power transfer efficiency of 9% and it can deliver 5 W power to the receiver side through the aluminum barrier.
ANALYSIS AND SIMULATION OF HARMONICS FOR VARIOUS RESIDENTIAL LOADS USING SIMU...ijiert bestjournal
Harmonics are the by - products of modern electronic devices i.e. nonlinear loads,this harmonics by drawing current in abrupt short pulses,rather than in a smooth sinusoidal manner. Any distribution circuit feeding nonlinear loads will contain some degree of harmonic frequencies in multiples . Due to the rapidly increasing number of non - linear loads in distribution systems,the harmonic distortion of the current and voltage increases. Examples of non - linear loads are personal computer,television set (TV),f luorescent tube with electronic ballast,compact fluorescent lamp,battery charger,uninterrupted power supply (UPS) and any other equipment powered by switched - mode power supply (SMPS) unit. As the number of harmonics - producing loads in residences has inc reased over the years,it has become increasingly necessary to address their effects on the distribution system. Power Quality of distribution networks is severely affected due to the flow of these generated harmonics. Harmonic currents generated by nonli n ear loads can cause problems on the power system. These harmonics can cause excessive heat in many appliances,and hence reduce the life span of the distribution transformer supplying such loads,protecting equipments in power system. It can also increase power consumption and reduce system efficiency. It also lowers the system power factor. In this paper presents the results of a SIMULINK of harmonic distortion caused by different non linear home appliances a nd analysis of percentage total harmonic distort ion which is found between ranges of 50 to greater than 200.
Model of Pulsed Electrical Discharge Machining (EDM) using RL CircuitIJPEDS-IAES
This article presents a model of pulsed Electrical Discharge Machining (EDM) using RL circuit. There are several mathematical models have been successfully developed based on the initial, ignition and discharge phase of current and voltage gap. According to these models, the circuit schematic of transistor pulse power generator has been designed using electrical model in Matlab Simulink software to identify the profile of voltage and current during machining process. Then, the simulation results are compared with the experimental results.
Fundamentals of electromagnetic compatibility (EMC)Bruno De Wachter
Electromagnetic interference, EMI, has become very important in the last few decades as the amount of electronic equipment in use has increased enormously. This has led to an increase in the sources of interference, e.g. digital equipment and switching power supplies, and an increase in the sensitivity of equipment to interference, due to higher data rates.
This development demands high quality electrical installations in all buildings where electromagnetic non-compatibility leads to either higher costs or to an unacceptable decrease in safety standards.
This application note gives an overview and a basic understanding of the major physical principles of electromagnetic interference and an introduction to the principles of mitigation of disturbing effects. As a result, the measures required to achieve an EMC-compliant installation should be easily understood.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Intelligent Fault Identification System for Transmission Lines Using Artifici...IOSR Journals
Transmission and distribution lines are vital links between generating units and consumers. They are
exposed to atmosphere, hence chances of occurrence of fault in transmission line is very high, which has to be
immediately taken care of in order to minimize damage caused by it. This paper focuses on detecting the faults
on electric power transmission lines using artificial neural networks. A feed forward neural network is
employed, which is trained with back propagation algorithm. Analysis on neural networks with varying number
of hidden layers and neurons per hidden layer has been provided to validate the choice of the neural networks
in each step. The developed neural network is capable of detecting single line to ground and double line to
ground for all the three phases. Simulation is done using MATLAB Simulink to demonstrate that artificial
neural network based method are efficient in detecting faults on transmission lines and achieve satisfactory
performances. A 300km, 25kv transmission line is used to validate the proposed fault detection system.
Hardware implementation of neural network is done on TMS320C6713.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
The wireless Power Transmission is a useful and proper technology is used in various fields like electronic devices, implantable medical devices, industry and other fields, and has become a research hotspot at home and abroad. Because it enables the transmission of electrical energy from a power source to an electrical load across an air gap without interconnecting wires. This paper reviews the methods used in the wireless power transmission system, recent technologies, future and its application, merits as well as demerits. Mrs. Yogita Shailesh Kadam "Wireless Power Transmission System- A Review" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-7 | Issue-3 , June 2023, URL: https://www.ijtsrd.com.com/papers/ijtsrd57380.pdf Paper URL: https://www.ijtsrd.com.com/engineering/electrical-engineering/57380/wireless-power-transmission-system-a-review/mrs-yogita-shailesh-kadam
Design of Active Filter for Reducing Harmonic Distortion in Distribution Networkijtsrd
Power transmission and distribution systems are designed for operation with sinusoidal voltage and current waveform in constant frequency. Power electronic control devices due to their inherent non linearity draw harmonic and reactive power form the supply mains. The wide use power electronic equipment with linear load causes an increasing harmonics distortion in the ac mains currents. Harmonics component is a very serious and harmful problem in the distribution system. The main adverse effects of harmonic current and voltage on power system equipment are overheating, overloading, perturbation of sensitive control and electronic equipment, capacitor failure, communication interferences, process problem, motor vibration, resonances problem and low power factor. This paper describes the modelling of active filter with synchronous d q reference frame theory for harmonic compensation in distribution systems. The case study is carried out at Hlaingtharyar township distribution system. The model is implemented for harmonic analysis from simulation using a Matlab Simulink with the THD values obtained by practical measurement. Khine Zar Maw "Design of Active Filter for Reducing Harmonic Distortion in Distribution Network" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26663.pdfPaper URL: https://www.ijtsrd.com/engineering/electrical-engineering/26663/design-of-active-filter-for-reducing-harmonic-distortion-in-distribution-network/khine-zar-maw
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.